How To Clean Memory Card On Mac

broken image


Insert the new memory card at a 25-degree angle. Line up the notch in the card with the small tab in the memory slot and slide the card into the slot until the gold edge is almost invisible. Firmly press the memory card into the memory slot. You might feel some resistance.

  • You need to start doing something helpful to get more memory for your Mac. Some proven-tips are listed below, just keep on reading. 8 Proven-Tips to Clean Up Memory on Mac You Need to Know. If your memory on Mac is full, that will cause many other problems, like frozen or slowdown. This can be the worst thing for those Mac users.
  • It is very simple, just select the photos from the memory card and click on 'Erase' button. Then the selected photos will be permanently erased. Option 2: Wipe all photos from memory card on Mac. This option will permanently destroy all the data on the memory card, including photos, files, audio, video, etc. Without exception.

To identify your MacBook Pro model, use the information in How to identify MacBook Pro models.

Once you're sure which model you have, find it in the list below to go to the instructions for that model. Note: Apple notebooks not listed in this table have non-removable memory.

13-inch

MacBook Pro (13-inch, Mid 2012)
MacBook Pro (13-inch, Late 2011)
MacBook Pro (13-inch, Early 2011)
MacBook Pro (13-inch, Mid 2010)
MacBook Pro (13-inch, Mid 2009)

15-inch

MacBook Pro (15-inch, Mid 2012)
MacBook Pro (15-inch, Late 2011)
MacBook Pro (15-inch, Early 2011)
MacBook Pro (15-inch, Mid 2010)
MacBook Pro (15-inch, 2.53GHz, Mid 2009)
MacBook Pro (15-inch, Mid 2009)
MacBook Pro (15-inch, Late 2008)
MacBook Pro (15-inch, Early 2008) and earlier

17-inchMacBook Pro (17-inch, Late 2011)
MacBook Pro (17-inch, Early 2011)
MacBook Pro (17-inch, Mid 2010)
MacBook Pro (17-inch, Mid 2009)
MacBook Pro (17-inch, Early 2009)
MacBook Pro (17-inch, Late 2008) and earlier

Applicable Models

The instructions provided below are for the following MacBook Pro (13-inch) models:

  • MacBook Pro (13-inch, Mid 2012)
  • MacBook Pro (13-inch, Late 2011)
  • MacBook Pro (13-inch, Early 2011)
  • MacBook Pro (13-inch, Mid 2010)
  • MacBook Pro (13-inch, Mid 2009)

Memory specifications

Use the tables below to confirm the memory you're installing is compatible with your MacBook Pro.

MacBook Pro (13-inch, mid 2012)
Number of memory slots2
Base memory4 GB
Maximum memory8 GB
Memory card specifications- Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format
- 67.6mm x 30mm (1.18 inch)
- 2 GB or 4 GB
- 204-pin
- PC3-12800 DDR3 1600 MHz type RAM
Additional notesFor best performance, fill both memory slots, installing an equal memory module in each slot.
MacBook Pro (13-inch, Late 2011) and MacBook Pro (13-inch, Early 2011)
Number of memory slots2
Base memory4 GB
Maximum memory8 GB
Memory card specifications- Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format
- 67.6mm x 30mm (1.18 inch)
- 2 GB or 4 GB
- 204-pin
- PC3-10600 DDR3 1333 MHz type RAM
Additional notesFor best performance, fill both memory slots, installing an equal memory module in each slot.
MacBook Pro (13-inch, Mid 2010) and MacBook Pro (13-inch, Mid 2009)
Number of memory slots2
Base memory4 GB
Maximum memory8 GB
Memory card specifications- Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format
-30mm (1.18 inch)
- 2 GB or 4 GB
- 204-pin
- PC3-8500 DDR3 1066 MHz type RAM
Additional notesFor best performance, fill both memory slots, installing an equal memory module in each slot.

Removing or installing memory

Warning: The internal components of your MacBook Pro can be warm. If you have been using your MacBook Pro, wait ten minutes after shutting down the computer to let the internal components cool before continuing.

Step 1: Remove the bottom case

  1. Shut down your MacBook Pro. Disconnect the power adapter, Ethernet cable, USB cables, security lock, and any other cables connected to the MacBook Pro to prevent damaging the computer.
  2. Turn over your MacBook Pro and remove the ten (10) screws that secure the bottom case. Because the screws are different lengths, note the screw lengths and locations so you can replace the screws correctly. Put them aside in a safe place. Lift off the case and place it to the side.
  3. Touch a metal surface inside the computer to discharge any static electricity from your body.

Step 2: Remove existing memory (if present)

  1. Push the levers on the sides of the memory module in an outward direction to release the module from the memory card slot. The memory pops up at an angle. Before removing it, make sure you find the half-circle notches. If you don't, try pressing the levers outward again.
  2. Hold the memory module by its notches and remove it from the slot.
  3. Remove the other memory module.
    Important: Hold the memory modules by their edges, and do not touch the gold connectors.

Step 3: Install memory

  1. Align the notch on the gold edge of the module with the notch in the lower memory slot.
  2. Tilt the card and push the memory into the slot.
  3. Use two fingers with firm, even pressure to push down on the memory module. There should be a click when you insert the memory correctly.
  4. Repeat this procedure to install an additional memory module in the top slot. Press down on the module to make sure it is level.
    Note: Make sure you install the memory according to this illustration, with the gold contacts inserted almost completely into the connector.

Step 4: Replace the bottom case

Replace the bottom case. Replace and tighten the ten screws you removed earlier, making sure to put the different length screws in their proper locations.

Applicable Models

The instructions provided below are for the following MacBook Pro 15-inch models:

  • MacBook Pro (15-inch, Mid 2012)
  • MacBook Pro (15-inch, Late 2011)
  • MacBook Pro (15-inch, Early 2011)
  • MacBook Pro (15-inch, Mid 2010)
  • MacBook Pro (15-inch, 2.53GHz Mid 2009)
  • MacBook Pro (15-inch, Mid 2009)

Memory specifications

Please use the tables below to confirm the memory being installed is compatible with your MacBook Pro.

MacBook Pro (15-inch, Mid 2012)
Number of memory slots2
Base memory4 GB
Maximum memory8 GB
Memory card specifications- Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format
- 30mm (1.18 inch)
- 2 GB or 4 GB
- 204-pin
- PC3-12800 DDR3 1600 MHz type RAM
Additional notesFor best performance, fill both memory slots, installing an equal memory module in each slot.
MacBook Pro (15-inch, Late 2011) and MacBook Pro (15-inch, Early 2011)
Number of memory slots2
Base memory4 GB
Maximum memory8 GB
Memory card specifications- Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format
- 30mm (1.18 inch)
- 2 GB or 4 GB
- 204-pin
- PC3-10600 DDR3 1333 MHz type RAM
Additional notesFor best performance, fill both memory slots, installing an equal memory module in each slot.
MacBook Pro (15-inch, Mid 2010), MacBook Pro (15-inch, 2.53GHz Mid 2009), MacBook Pro (15-inch, Mid 2009)
Number of memory slots2
Base memory4 GB
Maximum memory8 GB
Memory card specifications- Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format
- 30mm (1.18 inch)
- 2 GB or 4 GB
- 204-pin
- PC3-8500 DDR3 1066 MHz type RAM
Additional notesFor best performance, fill both memory slots, installing an equal memory module in each slot.

Removing or installing memory

Warning: The internal components of your MacBook Pro can be warm. If you have been using your MacBook Pro, wait ten minutes after shutting down the computer to let the internal components cool before continuing.

Step 1: Remove the bottom case

  1. Shut down your MacBook Pro. Disconnect the power adapter, Ethernet cable, USB cables, security lock, and any other cables connected to the MacBook Pro to prevent damaging the computer.
  2. Turn over your MacBook Pro and remove the ten (10) screws that secure the bottom case. Because the screws are different lengths, note the screw lengths and locations so you can replace the screws correctly. Put them aside in a safe place. Lift off the case and place it to the side.
  3. Touch a metal surface inside the computer to discharge any static electricity from your body.

Step 2: Remove existing memory (if present)

  1. Push the levers on the sides of the memory module in an outward direction to release the module from the memory card slot. The memory pops up at an angle. Before removing it, make sure you find the half-circle notches. If you don't, try pressing the levers outward again.
  2. Hold the memory module by its notches and remove it from the slot.
  3. Remove the other memory module.
    Important: Hold the memory modules by their edges, and do not touch the gold connectors.

Step 3: Install memory

  1. Align the notch on the gold edge of the module with the notch in the lower memory slot.
  2. Tilt the card and push the memory into the slot.
  3. Use two fingers with firm, even pressure to push down on the memory module. There should be a click when you insert the memory correctly.
  4. Repeat this procedure to install an additional memory module in the top slot. Press down on the module to make sure it is level.Note: Make sure you install the memory according to this illustration, with the gold contacts inserted almost completely into the connector.

Step 4: Replace the bottom case

Replace and tighten the ten screws you removed earlier, making sure to put the different length screws in their proper locations.

Applicable model

The instructions provided below are for the following MacBook Pro 15-inch models:

  • MacBook Pro (15-inch, Late 2008)

Memory specifications

Please use the table below to confirm the memory being installed is compatible with your MacBook Pro.

MacBook Pro (15-inch, late 2008)
Number of memory slots2
Base memory2 GB
Maximum memory4 GB
Memory card specifications- Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format
- 30mm (1.18 inch)
- 1 GB or 2 GB
- 204-pin
- PC3-8500 DDR3 1066 MHz type RAM
Additional notesFor best performance, fill both memory slots and install an identical memory module in each slot.

Removing or installing memory

Warning: The internal components of your MacBook Pro can be warm. If you have been using your MacBook Pro, wait ten minutes after shutting down the computer to let the internal components cool before continuing.

Step 1: Remove the access door

  1. Shut down your MacBook Pro. Disconnect the power adapter, Ethernet cable, security lock, and any other cords connected to the MacBook Pro to prevent damaging the computer.
  2. Turn over your MacBook Pro and locate the latch. Push down to release the latch and remove the access door that covers the battery and hard drive.
  3. The latch must be in its released, open position to remove the access door.

Step 2: Remove the battery

With the latch still in its open position, gently pull up on the tab to remove the battery.

Step 3: Remove the bottom case

  1. Remove the eight screws that secure the bottom case of your MacBook Pro, and then remove the bottom case.
    Important: Because the screws are different lengths, note the screw lengths and locations so you can replace the screws correctly. Put them aside in a safe place.
  2. Touch a metal surface inside the computer to discharge any static electricity from your body.

Step 4: Remove existing memory (if present)

  1. Push out the ejection levers on the sides of the memory module to release the module from the memory card slot. The memory pops up at an angle. Before removing it, make sure you find the half-circle notches. If you don't, try pressing the ejection levers again.
  2. Hold the memory module by the notches and remove it from the slot.
  3. Remove the other memory module.
    Important: Hold the memory modules by their edges; do not touch the gold connectors.

Step 5: Install memory

  1. Align the notch on the gold edge of the module with the notch in the lower memory slot.
  2. Tilt the card and push the memory into the slot.
  3. Use two fingers with firm, even pressure to push down on the memory module. There should be a click when you insert the memory correctly.
  4. Repeat, if necessary, to install an additional memory module in the top slot. Press down on the module to make sure it is level.
    Note: Make sure you install the memory according to the illustration below, with the gold contacts inserted almost completely into the connector.

Step 6: Replace the bottom case

Replace the bottom case. Replace and tighten the eight screws.

Step 7: Replace the battery

To replace the battery, make sure the latch is in its open position. Hold the battery at an angle and slide the lipped edge of the battery below the brackets on the outside edge of the battery bay. Gently press the battery down.

Step 8: Replace the access door

With the latch in the open position replace the access door, making sure it is level with the bottom case of your MacBook Pro, and press the latch into the closed position.

Applicable models

The instructions provided below are for the following MacBook Pro 17-inch models:

  • MacBook Pro (17-inch, Late 2011)
  • MacBook Pro (17-inch, Early 2011)
  • MacBook Pro (17-inch, Mid 2010)
  • MacBook Pro (17-inch, Mid 2009)
  • MacBook Pro (17-inch, Early 2009)

Memory specifications

Use the tables below to confirm the memory being installed is compatible with your MacBook Pro.

MacBook Pro (17-inch, Late 2011) and MacBook Pro (17-inch, Early 2011)
Number of memory slots2
Base memory4 GB
Maximum memory8 GB
Memory card specifications- Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format
- 67.6mm x 30mm (1.18 inch)
- 2 GB or 4 GB
- 204-pin
- PC3-10600 DDR3 1333 MHz type RAM
Additional notesYou can add two 4 GB memory modules for a maximum of 8 GB of memory. For best performance, fill both memory slots and install an identical memory module in each slot.
MacBook Pro (17-inch, Mid 2010), MacBook Pro (17-inch, Mid 2009), and MacBook Pro (17-inch, Early 2009)
Number of memory slots2
Base memory4 GB
Maximum memory8 GB
Memory card specifications- Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format
- 30mm (1.18 inch)
- 2 GB or 4 GB
- 204-pin
- PC3-8500 DDR3 1066 MHz type RAM
Additional notesYou can add two 4 GB memory modules for a maximum of 8 GB of memory. For best performance, fill both memory slots and install an identical memory module in each slot.

Removing or installing memory

Warning: The internal components of your MacBook Pro can be warm. If you have been using your MacBook Pro, wait ten minutes after shutting down the computer to let the internal components cool before continuing. Buy word 2011 for mac.

How To Clean Memory Card On Mac

Step 1: Remove the bottom case

  1. Shut down your MacBook Pro. Disconnect the power adapter, Ethernet cable, USB cables, security lock, and any other cables connected to the MacBook Pro to prevent damaging the computer.
  2. Turn over your MacBook Pro and remove the ten (10) screws that secure the bottom case. Because the screws are different lengths, note the screw lengths and locations so you can replace the screws correctly. Put them aside in a safe place. Lift off the case and place it to the side.
  3. Touch a metal surface inside the computer to discharge any static electricity from your body.

Step 2: Remove existing memory (if present)

  1. Push the levers on the sides of the memory module in an outward direction to release the module from the memory card slot. The memory pops up at an angle. Before removing it, make sure you find the half-circle notches. If you can't find the notches, try pressing the levers outward again.
  2. Hold the memory module by its notches and remove it from the slot.
  3. Remove the other memory module.
    Important: Hold the memory modules by their edges; do not touch the gold connectors.

Step 3: Install memory

  1. Align the notch on the gold edge of the module with the notch in the lower memory slot.
  2. Tilt the card and push the memory into the slot.
  3. Use two fingers with firm, even pressure to push down on the memory module. There should be a click when you insert the memory correctly.
  4. Repeat this procedure to install an additional memory module in the top slot. Press down on the module to make sure it is level.
    Note: Make sure your memory is installed according to the illustration below, with the gold contacts inserted almost completely into the connector.

Step 4: Replace the bottom case

Replace the bottom case. Replace and tighten the ten screws you removed earlier, making sure to put the different length screws in their proper locations.

Applicable models

The instructions provided below are for the following MacBook Pro 15-inch and 17-inch models:

  • MacBook Pro (17-inch, Late 2008) and earlier
  • MacBook Pro (15-inch, Early 2008) and earlier

Memory specifications

Please use the tables below to confirm the memory being installed is compatible with your MacBook Pro.

MacBook Pro (17-inch, Late 2008) and earlier and MacBook Pro (15-inch, Early 2008) and earlier
Number of memory slots2
Base memory512 MB (configure to order)
Maximum memoryRefer to the table below
Memory card specifications- Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format
- 30mm (1.18 inch)
- 200-pin
- PC2-5300 DDR2 667 MHz Type RAM


Refer to this table for the maximum amount of memory that can be recognized by these notebook computers:

2 GBMacBook Pro, MacBook Pro (17-inch), MacBook Pro (15-inch, Glossy)
3 GBMacBook Pro (15-inch and 17-inch Core 2 Duo)
Note: These models will support only 3 GB total memory. If you want to maximize the amount of SDRAM in your computer, install a 2 GB SO-DIMM in one slot and a 1GB SO-DIMM in the other.
4 GBMacBook Pro (15-inch 2.4/2.2 GHz), MacBook Pro (17-inch 2.4 GHz), MacBook Pro (15-inch Early 2008), MacBook Pro (17-inch Late 2008)

Removing or installing memory

You will need to remove the battery before installing additional memory and reinstall the battery after installing the memory. The following procedure includes all the necessary instructions for both parts of the process.

Warning: The internal components of your MacBook Pro can be warm. If you have been using your MacBook Pro, wait ten minutes after shutting down the computer to let the internal components cool before continuing.

Step 1: Remove the battery

  1. Shut down your MacBook Pro. Disconnect the power adapter, Ethernet cable, and any other cords connected to the MacBook Pro to prevent damaging the computer.
  2. Turn the computer over.
  3. Locate the battery release latches on each side of the battery.
  4. Slide both latches up. The battery should pop up slightly.
  5. Lift the battery out.

Step 2: Remove the memory door

  1. Using a Phillips size 00 screwdriver, unscrew the memory door and remove it from the battery bay of your computer. Depending on the model of your MacBook Pro, you may have three or four screws.
  2. Touch a metal surface inside the computer to discharge any static electricity from your body.

Step 3: Remove existing memory (if present)

If you need to remove a memory card—for example if you are replacing it or if you need to get past the memory in the top slot to access the bottom slot—you can remove the card by spreading the tabs on each side of the card away from the notches in the memory card. The card should pop up slightly. Lift the memory card to about a 25-degree angle and then gently slide the card out of the memory slot.
Important: Hold the memory modules by their edges; do not touch the gold connectors.

Step 4: Install memory

  1. Insert the new memory card at a 25-degree angle. Line up the notch in the card with the small tab in the memory slot and slide the card into the slot until the gold edge is almost invisible. Firmly press the memory card into the memory slot. You might feel some resistance.
  2. Gently spread the small tabs in the memory slot away from the notches and push the memory card down until the two tabs on either side of the card lock into place.
  3. Insert any additional memory into the second slot.
    Note: Make sure you install the memory according to the illustration below, with the gold contacts inserted almost completely into the connector.

Step 5: Replace the memory door

Replace the memory door, and make sure the door is lying flat before you screw it back into place. Best free video editor for mac.

Step 6: To insert the battery

  1. Place the bottom edge of the battery into the battery compartment at an angle, as shown below.
  2. Gently press the top edge of the battery down until the battery latch locks into place.

Learn more

Checking that your computer recognizes the new memory

After installing additional memory, you should confirm that the computer recognizes the new memory. To check the computer's memory:

  1. Start up your computer.
  2. When you see the Mac OS X desktop, choose the Apple () menu from the upper-left menu bar, then choose About This Mac.

The total memory includes the amount of memory that originally came with the computer plus the new memory you added, or if all the memory has been replaced, the new total for that memory. For detailed information about the amount of memory installed in your computer, open System Profiler by choosing Apple () and then About This Mac. Then, click More Info and then Memory from the Hardware section that appears in System Profiler.

If your computer doesn't recognize the memory or doesn't start up correctly, confirm that the memory you installed is compatible with your MacBook Pro and that it is installed correctly by reseating the memory.

Easily Restore Data like photos, videos and audio files from unreadable MicroSD card!!!

Well, when anyone faces SD card unreadable or such kind of situation then they may get upset as their important data such as their precious files are gone. But, let me clear your doubt that the data not gone completely from SD card, it presents their only. You can get back datafrom unreadable MicroSD card by using some easy ways.

How To Clear Memory Card On Mac

When data deleted in such a condition, they look for a solution that can help them to restore data from unreadable MicroSD card.

Many people have been found to report about the same issue but, let me inform you that there is no direct solution to fix unreadable memory card issue, however, you can recover deleted data from unreadable SD card with the help of some easy solutions mentioned in this article.

How To Fix Unreadable SD Card?

Fix #1: When MicroSD Card Is Not Detected By Computer

In such cases, you can try the below-mentioned solution.

  • Check USB port/card reader or USB cable if it is corrupted or not working.
  • Open Disk Management to format unreadable microSD card on Windows
  • Run command prompt to check and repair unreadable microSD issue

Fix #2: When SD Card Is Not Readable On Phone

Micro SD card is not recognized by Android phone? Well at such a condition, first of all, you must check your phone. May bet there is a phone hardware problem or Android system is incompatible. To check this follow the below solution:

  • Switch OFF and Switch ON your phone. You can also reboot your phone.
  • Restore phone to factory setting (but after taking the entire backup), because factory reset erases all the data.

You can also plug-in your card to another phone and check if it is readable by it or not. If readable then copy-paste the data from it and thenformat memory card to re-use it again.

Fix #3: Connect The SD Card To The Another Device

At that time, when a device unable to access an SD card due to some reason or other driver-related problems. In such a situation, you can try to connect the SD card to another device in your computer system.

Fix #4: Assign New Drive letter

Connect micro SD card to the specific card reader in your computer system, if your PC doesn't permit to assign a new drive letter, then it will unable to read your SD card. In a few conditions, the card reader may permit you to assign a new drive letter, but you can get messages like ‘please insert the disk'.

To solve this issue you have to assign a new drive letter to a specific connected SD card by your system's setting.

Reasons For Data Loss From Memory Card (SD, Micros SD, SDXC, SDHC, ETC)

There are several reasons for the data loss from storage media like USB drive, memory card etc. Though, some happen mistakenly while some happen automatically or due to some other errors. Well, some of the reasons are mentioned below which makes your data loss.

Human errors– Some of the data gets deleted from devices by users in the following ways:

  • Data get lost by pressing cut+paste command
  • Using Shift+Delete key to delete folder/files
  • Sometimes while saving data or transferring, camera is switched off
  • Accidentally pressing ‘format' or ‘Delete all' option during previewing pictures
  • When the battery is low and clicking pictures at that time
  • Ejecting the memory card at the time of copying data

Power failure– While copying any data from any storage device, if power fails in between then it gets damaged and the data get lost.

Corruption of memory card– While transferring data like pictures, audios from media files, if you pull the card reader or memory card from the digital device then card gets corrupted and hence, data gets lost.

Inaccessible of data due to error– When any type of digital media is connected to the computer then some memory card errors get displayed like ‘format memory card now' or ‘USB flash drive not formatted' which can make your memory card or hard drive inaccessible.

Recover Media Files From Unreadable MicroSD Card Using Recommended Software

You can use the above option to know how to fix unreadable SD card. But even after you finished to fix micro SD card, you are unable to recover your data then you can also try Micro SD Card Data recovery software. This tool has such ability that it can let you restore deleted data from Micro SD card.

How much is photoshop for mac 2017. From this software, you can perform:

  • File recovery from various memory cards such as SD card, SDHC, SDXC, miniSD, MicroSD, memory stick, xD card, MMC, CF, TF, XQD, SmartMedia and other several cards
  • Restore files after memory card format error, card corruption, card damages and other errors that make SD card unreadable
  • Supports recovery of cards inserted in Digital Still Camera DSC, DSLR camera, video camcorder, android phone, Blackberry, Windows phone, smartphone, mp3 mp4 player, media recorder and so on
  • Supports all brands of memory cards such as SanDisk, Kingston, KingMax, Sony, Lexar, PNY, PQI, Toshiba, HP, Samsung, Qmemory, Transcend, Apacer, Pretec, Hitachi, SimpleTech, Viking, OCZ Flash Media, ATP, Delkin Devices, A-Data, etc
  • The Tool is available for both Windows and Mac computer
  • Read-only program, 100% risk-free & easy to use

This is powerful recovery software that can easily retrieve media (photos, videos and audio) files from SD Cardunreadable as well as undelete files from hard drive, USB drive, digital cameras, USB flash drives, etc.

The unreadable microSD card recovery software is 100% safe and performs the best recovery than any other software. The software is very powerful as it helps get back data from Unreadable MicroSD Card and rescues the lost photos, audios and videos from it.

You can try these below steps to recover such deleted data. The steps are so easy to perform. So, you can easily try it.


* Free version of the program only scans and previews recoverable objects.

Steps To Recover Data From Unreadable MicroSD Card

Step 1: Select Desired Location

Firstly, select the drive, external media or volume from which you want to recover deleted media files. After selecting, click on 'Scan'.

Step 2: Preview Recovered Media Files

Next, you can preview the recoverable media files after the scanning process is completed.

Step 3: Recover Media Files

Lastly, you can select the images, audio, video files you want to restore and click on 'Recover' option to save them at the location you want.

Tips To Remember:

When you lose your most precious data from your storage device then it becomes very important to recover your data. But if you apply some helpful tips then you can never come across such a situation of losing data. Here are some of the tips you can apply:

  • Never remove the files when the file transfer process is in progress.
  • Try to make a complete backup of all your important files or folders so that it can help you in the future when any data loss situation happens.
  • Always use some reliable power source that can help your system from a sudden shutdown.
  • Always check your storage device at least two to three times before formatting.
  • Do not use any digital device when its battery is low.
  • Try to avoid using the same device when it is already used and it is full. Also, keep it in a safe place and do not save any new media files otherwise the previous data will be overwritten.
  • Be very careful while removing the device from a computer or from any other system.

How To Clean Memory Card On Macbook

Time to Conclude

You can fix undetected/unrecognized Micro SD card with the help of the above fixing solution and can make your data recovery from SD card easily. Although the given fixes are very effective and easy to use for several people.

How To Clean Memory Card On Mac Computers

After using these fixes if you found that your data gets deleted then you can easily retrieve lost data from unreadable MicroSD card trying the best SD card recovery tool. Lastly, I think the given fixes also work in your case too.



If you have found this post helpful and useful, then please do not forget to share it.

How To Clean Memory Card On Macbook Air

Also like and follow us on Facebook, Twitter and Pinterest to get the latest updates.

Alex is an expert technical writer with 7+ years of experience. His in-depth knowledge about data recovery and fascination to explore new DIY tools & technologies have helped many. Alex has a great interest in photography and loves to share photography tips and tricks with others.

How To Clean Memory Card On Mac Os

  • Shares




broken image